Table of Contents
Advertisement
TROUBLESHOOTING
INDICATION ON THE FRONT PANEL & COUNTERMEASURES
If for some reason printing is not possible or error occurs during printing, the indicator on the front panel will be lit.
In this case, follow the procedure described below.
: lit
: goes on and of f
ALARM
SHEET/PAPER OPTION DATA
*Note : 1
The lamp goes on and off after transferring data and just before starting printing operation.
*Note : 2
In case of L-size printing, the image is not printed completely.
*Note : 3
When setting the continuous printing, the continuous printing is carried out after the error message goes off.
*Note : 4
When the printing unit is pulled out, PAPER FEED & CUT button is invalid.
After pushing the printing unit until it is locked into place, press the PAPER FEED & CUT button.
18
: not lit
Causes and countermeasures
The printing unit is not inserted correctly.
• Insert the printing unit until it is locked.
The sheet cartridge is not installed. *Note : 1
• Install the sheet cartridge.
Paper is not set.
Paper is not set correctly.
• Set the print paper correctly.
Paper or ink sheet runs out during printing. *Note : 2
• Install the sheet cartridge.
The temperature of the thermal head becomes too
high.
• Wait until the message goes off. *Note : 3
Paper jamming occurs.
Other defects.
• Refer to "Overcoming paper jams".
• Make sure the ON LINE lamp is not lit, and press
PAPER FEED & CUT button.
If the status is not improved by carrying out this
measure, consult your dealer. *Note : 4
Page
1 5
1 5
1 3 - 1 4
1 5
1 9
Advertisement
Table of Contents
