Table of Contents
Advertisement
33
10.6 Audio Command
Adding a check mark to the Audio command
in the View menu outputs the audio when plying back the audio-recorded
medium. Stopping the image playback starts the audio for several seconds before and
after the stopped frame.
3 levels of audio settings (short/middle/long) are available.
Note:
The audio playback period
will vary depending on the recording settings (recording interval/recording image qualit
y) etc. of the medium.
10.7 Camera Command
Figure 10.7 Camera commands
When performing media playback from a
unit that has the multiplexer function, the Camera command
in the View menu lets you select the playback camera.
- Selecting ALL initiates sequential playback of all cameras.
- Selecting any other option will add that camera to the group of
cameras currently playing.
Advertisement
Table of Contents
