Renew Info Command - Mitsubishi DX-PC3 Instruction Manual

6.5 Renew info Command

The latest recorder information can be acquired using the Renew info command
in the Network menu. Information is automatically updated (approximately) every 3
minutes even if this command is not selected.
Note:
Automatic Disconnect function
The networking feature will activate its Automatic Disconnect function 30 minutes after
a connection to a recorder has been established, and a message box will be appear
on-screen (Figure 6.5.1).
If the Disconnect Now button is selected, the connection will be terminated
after two minutes and the following message will be displayed (Figure 6.5.2).
If the Continue button is selected, the connection will be sustained for another 30
minutes.
Figure 6.5.1
Figure 6.5.2
25