Mitsubishi DX-PC3 Instruction Manual page 10

10
Each of the buttons appearing in the bottom portion of the Operation Panel has a
different function as described below. The Renew Info function can
also be accessed from the Network menu, and the other buttons canbe accessed
using commands found in the Operation menu.
Rewind (Jump to Starting Position)
Moves to the beginning of a recording segment on the current connected DVR
Reverse Search
Starts search playback in the reverse direction.
Search playback speed can be adjusted through repeated clicks of this button. (1X -> 2X
-> 4X -> 8X -> 1X...)
Reverse Playback
Starts playback in the reverse direction. Also, starts skip reverse playback when Skip
Playback has been selected in the Operation menu.
Field Reverse
Moves to the previous field and stops.
Stop
Stops playback. If the audio command is ON, audio playback continues after
image playback has stopped. (Audio playback does not occur when Stop is used
during playback in communication mode.)
Field Advance
Moves to the next field and stops.
Playback
Begins playback in the normal direction. Also, starts skip playback when Skip
Playback has been selected in the Operation menu.This button
is also used to activate the PC playback software feature.
Forward Search
Starts search playback in the normal direction.
Search playback speed can be adjusted through repeated clicks of this button. (1X -> 2X
-> 4X -> 8X -> 1X...)