Operation Menu; Eject Command; Skip Mode Command - Mitsubishi DX-PC3 Instruction Manual

29

8 Operation Menu

Figure 8 Operation menu
For details regarding the Operation, please refer to Section 3.2 (Operation panel) .

8.1 Eject Command

Clicking the Eject command in the Operation menu Ejects the media from SCSI devise

8.2 Skip mode Command

Adding a check mark to the Skip Mode command in the Operation menu will
open the following window on-screen.(Figure 8.2) This feature comes in very handy
when playing back a medium used for a recorder without multiplexer functions.
Figure 8.2 Skip mode window
Adding a check to the Skip Mode checkbox allows the recorder to start
skip playback at the designated interval.
In the Number of Field to Skip, the number of
cameras used for recording in the medum can be set.
Clicking or button of Camera Select will
switch the images to the designated camera during playback.
This function can be used only when active cameras are fixed through the multiplexer.
Set Number of Field in SCSI of the Options dialog box (See Section 10.4) to an integral
multiple of the number of cameras when using forward or reverse search function.