Selection Of Gamma ( ) Curve - Mitsubishi P91W Operation Manual

Releasing ABC mode
Hold down the print size button "
A tone is given, LED display changes from

Selection of Gamma ( ) Curve

You can select -curve by pressing the gamma button "
Each time the button is pressed, the indicator and -curve
number is switched. After a -curve number has been
selected, press any other button to store the -curve number.
Indicator/Adjustable item
-curve set
mode
" for approx. 3 seconds.
BRT CONT
To select the gamma ( curve (density diagram charac-
teristic) use this mode. This mode will help optimize
prints. There are six settings. Select -curve " " for
video equipment. Select -curve " " and " " - " " for
ultrasonic diagnostic equipment. Setting " " is recom-
mended for ultrasonic equipment. When " " is selected,
the picture will be printed in negative regardless of the
setting of #4 DIP-SW on the rear panel.
15
to and ABC mode is released.
PRT-SIZE GAMMA COPY/FEED
Adjustable contents
".