Label Decoration; Attaching The Seat - Fisher-Price T8822 Instruction Sheet

Label Decoration

2
12
1
(Place remaining
label 1's on
opposite side of
front wheel)
5
• Make sure the areas where the labels will be applied are
clean and dry. Wipe your vehicle with a clean, soft, dry
cloth to remove any dust or oils.
• For best results, avoid applying a label more than once.
• Apply the labels as shown in the illustration above.
• After applying the label, rub the label fi rmly with a cloth to
make sure the label is adhered to your vehicle.
(Place label 6
(Place label 7
on opposite side)
on opposite side)
8
9
(Place label 4
on opposite side)
4
13
(Place label 13
10
on opposite side)
(Place label 11 on
opposite side of seat)
SIDE VIEW
3
DASH VIEW

Attaching the Seat

Hint: The seat can be attached to the frame in any of three
positions, depending on the size of your child. Check
your child's fi t on the trike by observing the seat to pedal
distance, as it is being ridden. If the pedals seem too far
away or too close for your child, move the seat up or down.
Seat
Tabs
Seat
Retainer
Slots
Lower Position
• At an angle, insert the tabs on the seat into any of the top
three sets of slots for the lower, middle or upper position.
• Lower the seat so that the seat retainer inserts and snaps
into the slots in the frame.
• Pull up on the seat to be sure it is secure.
6
Middle Position
Upper Position