Summary of Contents for Fisher-Price Barbie Free Spirit Trike 72639
Page 1
72639b-0920.qrk 12/6/00 9:26 AM Page 1 Free Spirit Trike Instructions Model Number: 72639 Please keep these instructions for future reference. Adult assembly is required. Tools needed for assembly: Hammer, Phillips Screwdriver, Scrap Block of Wood (all not included). If you have any questions about this product, or are missing a part, please call us toll-free at 1-800-432-KIDS, rather than return this product to the store.
Page 2
72639b-0920.qrk 12/6/00 9:26 AM Page 2 WARNING IMPORTANT! • Please save all packaging material until assembly • Adult supervision is required. is complete to ensure that no parts are discarded. • If you are missing a part, please call us toll-free at •...
72639b-0920.qrk 12/6/00 9:26 AM Page 3 Assembly Assembly CAUTION Straight Axle Washer This product contains small parts in its unassembled state. Adult assembly is required. Rear Wheel Hubcap Indented Side Down Straight Axle • Slide a hubcap (peg side up) onto the straight axle. •...
Page 4
72639b-0920.qrk 12/6/00 9:26 AM Page 4 Assembly Assembly Pedal Hub Indented Pedal Axle Side Up Cap Nut Hubcap Rear Wheel Slot Pedal Hub Washer Straight Axle • Fit two pedal hubs onto the pedal axle tabs. Make sure the Frame tabs fit into the slot in each pedal hub.
Page 5
72639b-0920.qrk 12/6/00 9:26 AM Page 5 Assembly Assembly Pedal Hub Lock Washer Pedal Axle (Inside) Pedal Pedal Axle Pedal Hub Front Wheel Assembly • Turn the front wheel assembly over. • Insert a pedal hub onto the top of the pedal axle and into Scrap Block the hole in the center of the front wheel.
Page 6
72639b-0920.qrk 12/6/00 9:26 AM Page 6 Assembly Assembly Seat Pegs Handlebar Holes Frame Neck Fork Post • At an angle, insert one peg on the back of the seat into the Fork Cover hole in the top rear of the frame. •...
72639b-0920.qrk 12/6/00 9:27 AM Page 7 Label Decoration Label Decoration Proper label application will help to keep the labels looking their best! • Wash your hands before applying the labels. • Make sure the areas where the labels will be applied are clean and dry. Wipe your vehicle with a clean, soft, dry cloth to remove any dust or oils.