Advertisement
Assembly
Handlebar Front
Handlebar Back
1,9 cm Screw
5,7 cm Screw
9
•
Fit the handlebar front to the fork post.
Hint: The handlebar front is designed to assemble to the fork post
one way.
•
Fit the handlebar back to the fork post and handlebar front. Hold
them together firmly.
•
First, insert the remaining M4,5 x 1,9 cm screws through the
outer holes in the handlebar back and tighten.
•
Then, insert the M4,5 x 5,7 cm screw through the center hole in
the handlebar back and tighten.
Fork Post
1,9 cm Screw
x 2
x 1
6
Label Decoration
•
Make sure the areas where the labels will be applied are clean
and dry. Wipe your product with a clean, soft, dry cloth to
remove any dust or oils.
•
Refer to the photos located on the package flaps to apply
the labels.
•
For best results, avoid applying a label more than once.
Note: Your product may come with replacement warning labels
which you can apply over the factory applied warning label if
English is not your primary language. Select the warning label
with the appropriate language for you.
Advertisement
