Viewing 3D Images - Mitsubishi Electric DLP HC7900DW User Manual

Viewing 3D images

With the separately sold 3D glasses and 3D emitter,
you can enjoy viewing 3D images on this projector.
Usable 3D glasses and 3D emitter
The following table shows the usable 3D glasses and
3D emitter.
3D glasses
General-purpose liquid
crystal shutter 3D
glasses
*1
*1: Some 3D glasses may not work with this projector. Ask
the dealer for details. RF 3D glasses are not usable.
Installing the 3D emitter
Connect the 3D emitter to the projector according
to the operation manual of the 3D emitter. For
connection, use the mini DIN 5-pin cable supplied with
this projector.
3D emitter (option)
To 3D emitter
terminal
Mini DIN 5-pin cable
3D images viewing
This projector is able to display the following 3D
display supporting broadcasts and signals as
stereoscopic images. (As of June, 2012)
• 3D images input from the recorder/player
supporting 3D display. (Side by side, top and
bottom, and frame packing)
• 3D images by the digital terrestrial broadcasting
and BS digital broadcasting. (Side by side) (For
viewing 3D images with CATV (cable television),
please consult CATV broadcasters or CATV
providers.)
(For details about the supported 3D image signal
formats, see "3D supported signals" on page 53.)
This projector is also able to display 3D images
converted from 2D images.
3D emitter
EY-3D-EMT2H
To 3D SYNC
terminal
To view 3D images:
Preparation:
• Please read the user manuals of the 3D glasses and
3D emitter carefully before viewing the 3D images.
• Switching the 3D mode (such as 3D setting system)
of the recorder/player may be required when
projecting 3D images from the recorder/player
supporting 3D display. Read the user manual of the
recorder/player for details.
1. Project a 3D image on the screen.
2. Turn the power switch on the 3D glasses to ON.
IMAGE
3. Wear the 3D glasses.
PICTURE MODE
• Now you are ready to view 3D images.
GAMMA MODE
CONTRAST
To change the 3D viewing mode:
When 3D images aren't displayed properly, change the BRIGHTNESS
following setting using the menu.
COLOR TEMP.
(See page 29 for menu setting.)
COLOR
1. Display the IMAGE menu. TINT
SHARPNESS
2. Select 3D by pressing the p or q button.
IRIS
3D
ADVANCED MENU
3. Press the ENTER button.
PICTURE MENU RESET
• The 3D menu will appear.
3D
3D MODE
3D SYNC.
FINE 3D SYNC.
24P FRAME RATE
3D F.R.C. LEVEL
2D-3D
CONVERSION
3D DEPTH
4. Press the p or q button to select the desired item
and press the t or u button to select the desired
option.
3D MODE
If 3D images aren't displayed properly with
AUTO selected, select the video format (FRAME
PACKING, SIDE BY SIDE, or TOP AND BOTTOM)
suitable for the 3D image being displayed.
Alternatively, you can select the video format using
the 3D MODE button on the remote control. To
accept the video format you have selected, press
the ENTER button after selection.
3D SYNC.
If you feel uncomfortable while viewing 3D images,
the right-left synchronization between the 3D image
and the 3D glasses (LCD shutter) may be lost. In
such a case, set 3D SYNC. to REVERSE.
EN-25
opt.
AV MEMORY1
CINEMA
0
0
MEDIUM
0
0
0
OK
OK
OK
OK
AUTO
NORMAL
0
96Hz
2
OFF
5