Mitsubishi Electric DLP HC7900DW User Manual page 31

Menu operation (continued)
IMAGE menu (continued)
ITEM
ADVANCED MENU
SCREEN SIZE
VERTICAL LOCATION
CW SPEED
FRAME RATE CONVERSION OFF
F.R.C. LEVEL
BrilliantColor™
NOISE REDUCTION
CTI
HDMI INPUT
SETUP
COLOR MANAGEMENT
COLOR SPACE
PICTURE MENU RESET
• When FRAME RATE CONVERSION is set to other than OFF, the image may flicker at an instant when the menu is
displayed.
• While a 3D image is displayed, you cannot set SCREEN SIZE, CW SPEED, FRAME RATE CONVERSION, and
F.R.C. LEVEL.
• While a 2D image is displayed except for 24P, you cannot set CW SPEED.
SETTING FUNCTION
The ADVANCED MENU is displayed for the following settings.
OK
2 options Select according to the screen size.
±26 Use to adjust the position (height) of the projected image.
4x / 6x Select the color wheel speed. 6x is effective only when a 1080p 24
signal is input.
A 96Hz driver provides four times in the input of 24P, realizing a speed
of film. This mode is suitable for playing games as this mode does not
cause the image delay due to conversion.
TRUE FILM Use to produce the sharp images, leaving frame-by-frame feeling
unique to films.
TRUE VIDEO Use to reduce blurring of the moving images by interpolating the
video images.
1 - 5 Use to adjust the effect level of the motion interpolation for the frame
rate conversion.
ON / OFF Use to select whether or not to enable the BrilliantColor™.
ON / OFF Reduces noise of projected images when the input signal is noisy.
0 - 5 Use to correct smeared color boundaries.
AUTO The proper setting is automatically selected for HDMI input signal.
ENHANCED Select this when solid black appears with AUTO selected for HDMI
input. (See page 16.)
NORMAL Select this when grayish black appears with AUTO selected for HDMI
input. (See page 16.)
SUPERWHITE Select this when solid white appears with AUTO selected for HDMI
input. (See page 16.)
Select AUTO for normal use. When LANGUAGE is not set to
AUTO
to 7.5% automatically.
OFF Select to make black lighter.
3.75% / 7.5% Select to make black intense.
• When 7.5% is chosen, the brightness is decreased by the set-
ON / OFF Select ON
GAIN, SATURATION and HUE of six different colors. (See page 39.)
WIDE The color space becomes wider than that of NORMAL and colors
appear natural.
NORMAL The color space gets close to that of sRGB.
Pressing the ENTER button resets the picture quality settings of the
OK
selected picture mode to the factory defaults.
and 480i, 480p or TV60 signal is input, the SETUP changes
up cancel function for the U.S. Choose OFF when the image is
dark.
to change to any desired color by adjusting each of
EN-31