Mitsubishi Electric DLP HC7900DW User Manual page 26

Viewing 3D images (continued)
FINE 3D SYNC.
If you feel something wrong with or find ghosts
in the 3D image being displayed, the open/close
timing of the lens (liquid crystal shutter) of the 3D
glasses may be out of sync with the displayed
image. In such a case, adjust the setting of FINE
3D SYNC.
24P FRAME RATE
When you are annoyed with flicker in a bright area
in the image when a 1080p24 frame packing signal
is input, select 120Hz.
• When 24P FRAME RATE is set to 120Hz,
the motion interpolation by the frame rate
conversion isn't performed while a 3D image is
displayed.
3D F.R.C. LEVEL
You can control the effect level of the motion
interpolation by the frame rate conversion while a
3D image is displayed.
• The motion interpolation to 3D images works
only when a 1080p24 frame packing signal is
input.
To stop the signal emitted from the 3D emitter
temporarily:
While you are viewing a 3D image, the remote control
of your DVD recorder or other apparatus may not work
properly. In such a case, stop the signal emitted from
the 3D emitter temporarily by pressing the 3D SYNC
PAUSE button on the remote control of the projector.
Note that while the signal is stopped, a warning
message appears and images aren't displayed in the
3D mode.
To convert 2D images to 3D images:
With the remote control:
1. Project a 2D image.
2. Press the 3D MODE button.
3. Press the t or u button to select AUTO
press the ENTER button.
4. Press the 2D-3D button.
5. Press the t or u button to select ON.
• Now 2D images are converted into 3D images.
6. Turn the power switch on the 3D glasses to ON and
wear the 3D glasses.
7. Press the ENTER button.
• The screen for adjusting the depth of the
converted 3D images will appear.
8. Adjust the depth of the converted 3D images by
pressing the t or u button.
• You can select the depth from 10 levels (1 to
10). As the level increases, the appearance of
depth is enhanced.
• To finish the conversion to 3D images, press the
2D-3D button and then press the t or u button
to select OFF.
With the 3D menu:
(See page 29 for menu setting.)
1. Project a 2D image.
2. Display the IMAGE menu.
3. Select 3D by pressing the p or q button and press
the ENTER button.
• The 3D menu will appear.
4. Select 3D MODE by pressing the p or q button.
5. Set 3D MODE to AUTO
button and then press the ENTER button.
6. Reapeat steps 2-3 to display the 3D menu again.
7. Select 2D-3D CONVERSION by pressing the p or
q button.
8. Set 2D-3D CONVERSION to ON by pressing the t
or u button.
• Now 2D images are converted into 3D images.
9. Turn the power switch on the 3D glasses to ON and
wear the 3D glasses.
10. Select 3D DEPTH by pressing the p or q button.
11. Adjust the depth of the converted 3D images by
pressing the t or u button.
• To finish the conversion to 3D images, set 2D-
3D CONVERSION back to OFF.
Important:
• If the viewing distance is nearer than the
recommended distance, it will cause physical
discomfort and eye fatigue.
• The 3D glasses may not work properly when it is
used too far from the screen.
• Watch the contents in front of the screen, not at big
and
angle. If you are viewing the screen at big angle,
you may not be able to view 3D contents correctly.
• There are personal differences in viewing the 3D
images. For persons with myopia, hypermetropia,
astigmatism or left and right sights, please wear
glasses to correct them then wear the 3D glasses.
• The picture seems misplaced at the start of
projecting the 3D images, however, this is not a
malfunction.
• 3D images converted from 2D images appear
blurred due to conversion.
• While side-by-side or top-and-bottom 3D images are
displayed, the aspect ratio setting is fixed to 16:9.
• When you display a menu or dialog while viewing
side-by-side or top-and-bottom 3D images, they
are displayed in the 2D mode temporarily. When
the menu or dialog disappears, they are displayed
in the 3D mode again.
EN-26
3D
3D MODE
3D
3D SYNC.
3D MODE
by pressing the t or u
FINE 3D SYNC.
3D SYNC.
24P FRAME RATE
FINE 3D SYNC.
3D F.R.C. LEVEL
3D GLASSES HIGH SPEED
2D-3D
CONVERSION
24P FRAME RATE
3D DEPTH
3D F.R.C. LEVEL
2D-3D
CONVERSION
3D
3D DEPTH
3D MODE
3D SYNC.
FINE 3D SYNC.
3D GLASSES HIGH SPEED
24P FRAME RATE
3D F.R.C. LEVEL
2D-3D
CONVERSION
3D DEPTH
AUTO
NORMAL
AUTO
0
NORMAL
96Hz
0
2
OFF
96Hz
5
2
OFF
5
AUTO
NORMAL
0
96Hz
2
OFF
5