Menu Operation - Mitsubishi Electric DLP HC7900DW User Manual

Menu operation

You can make various settings using the displayed menus. You can make various settings using the displayed menus.
IMAGE PICTURE MODE
GAMMA MODE
SHARPNESS
ADVANCED MENU
PICTURE MENU RESET
INSTALLATION
AUTO POWER ON
AUTO POWER OFF
SPLASH SCREEN
IMAGE REVERSE
TRIGGER1(POWER)
TRIGGER2(ANAMO)
TEST PATTERN
FEATURE
PASSWORD FUNCTION
MENU POSITION
MENU DIMMER
CINEMA MODE
REMOTE POSITION
SIGNAL HORIZ. POSITION
VERT. POSITION
FINE SYNC.
TRACKING
COMPUTER INPUT
INFORMATION LAMP TIME (LOW)
VERTICAL FREQUENCY
HORIZONTAL FREQUENCY
SYNC. TYPE
*1 CINEMA , VIDEO
ISF(DAY), ISF(NIGHT), AV MEMORY1
AV MEMORY2
*1 CINEMA, 2.0, 2.1(VIDEO), 2.2, 3D, 2.4
USER1 , USER2
*1
CONTRAST ±30
BRIGHTNESS *1 ±30
COLOR TEMP. *1 HIGH BRIGHTNESS, COOL, MEDIUM, WARM
USER
COLOR *1 ±10
*1
TINT ±10
*1 *2 ±5
IRIS *1 OFF, AUTO 1, AUTO 2, AUTO 3
3D OK
OK
OK
±15
KEYSTONE *3
LAMP MODE STANDARD, LOW
ON, OFF
OFF, 5 min, 10 min, 15 min, 30 min, 60 min
ON, OFF
BACK COLOR BLUE, BLACK
OFF, MIRROR, INVERT, MIRROR INVERT
ON, OFF
ON, OFF
CROSS HATCH
*1 *3
ASPECT AUTO, 4:3, 16:9, ZOOM1, ZOOM2, STRETCH, ANAMORPHIC1, ANAMORPHIC2
DISPLAY INPUT
1 (Upper left), 2 (Lower right)
ON, OFF
*1 *6 AUTO, VIDEO, FILM
AUTO, FRONT, REAR, TOP, FRONT/TOP, REAR/TOP, FRONT/REAR
, English, Español, Deutsch, Français, Italiano,
LANGUAGE
RESET ALL OK
*1 *7 0 - 999
*1 *7 0 - 999
*1 *7 0 - 31
*1 *2 *7 0 - 9999
*1 AUTO, RGB, YC
OVER SCAN *1 100 - 90%
HOLD ON
*1 *7
OFF
USER
OK
*1: Not available (or not displayed) unless an external signal is input.
INPUT
*2: Not available with certain signals.
RESOLUTION *1
*3: Not available when a 3D image is displayed.
*1
*4: Available only when the input signal is 480i, 480p, 576i, 576p, TV60 or TV50.
*1
*5: Available only when RGB output is selected on the output device side.
*1 *7
*6: Available only when the input signal is TV50, TV60, 480i, 576i or 1080i.
*7: Not available when the input signal is from the HDMI 1 or HDMI 2 terminal.
*8: Setting range differs depending on the input signals.
*9: Available only when the input signal is 480i, 480p, 576i, or 576p.
*10: The ISF(DAY) and ISF(NIGHT) modes are adjustable by ISF-certified professionals only. Contact
your dealer for details of the ISF adjustment.
, 3D , GAME , *10
,
, AV MEMORY3
3D MODE AUTO
3D SYNC. NORMAL, REVERSE
FINE 3D SYNC.
24P FRAME RATE *2
3D F.R.C. LEVEL *2
2D-3D CONVERSION ON, OFF
3D DEPTH
SCREEN SIZE *3 16:9, CINEMA SCOPE (2.35:1)
VERTICAL LOCATION
CW SPEED *2 *3
FRAME RATE CONVERSION *1 *3 OFF, TRUE FILM, TRUE VIDEO
*3
F.R.C. LEVEL
BrilliantColor™ *1 ON, OFF
NOISE REDUCTION *1 *4
ON, OFF
CTI *1 *2
HDMI INPUT *1 AUTO, ENHANCED, NORMAL, SUPERWHITE
*1 *2
SETUP AUTO, OFF, 3.75%, 7.5%
COLOR MANAGEMENT *1
COLOR SPACE *1 WIDE, NORMAL
, WHITE , BLACK
, MENU ACCESS LOCK
UNLOCK
*8
*8
*8
C /YP P
B R B R
*8
BEGIN
END
EN-28
REFERENCE 2.0, 2.1(VIDEO), 2.2, 3D, 2.4
ADJUST MODE ALL, RED, GREEN, BLUE
2%, 4%, 6%, 10%, 15%, 20%,
±99 (R) ±99 (G) ±99 (B)
25%, 30%, 40%, 50%, 70%, 90%
REFERENCE COOL, MEDIUM, WARM
CONTRAST R ±60
CONTRAST G ±60
CONTRAST B ±60
±60
BRIGHTNESS R
BRIGHTNESS G ±60
BRIGHTNESS B ±60
, FRAME PACKING , SIDE BY SIDE
0 - 10
96Hz, 120Hz
0 - 5
1 - 10
±26
4x, 6x
1 - 5
0 - 5
ON
OFF
COLOR
RED, YELLOW, GREEN,
CYAN, BLUE, MAGENTA
GAIN -49 - 50
SATURATION
±50
HUE
±50
POSITION
RIGHT UP, LEFT DOWN
FULL/MONO
FULL COLOR, MONO COLOR
RESET OK
*6
OK
OK
, , , PORTUGUÊS
CLAMP POSITION
CLAMP WIDTH
VERT. SYNC
LPF *7 *9
SHUTTER(U)
0 - 99 SHUTTER(L)
0 - 99 SHUTTER(LS)
SHUTTER(RS)
, TOP AND BOTTOM
*5
*7 1 - 255 *8
*7 1 - 63 *8
*3
AUTO, OFF
ON, OFF
*3 0 - 32
*3
0 - 32
*3 0 - 95
*3 0 - 95