Table of Contents
Advertisement
2. VIDEO SERVER Installation
2.1 Installation Order
For the operation of the Video Server, it is necessary to connect a network cable to power,
and connect a general analog camera. Depending on operation methods, it is possible to
connect an alarm cable or audio cable additionally. For its fixation on different locations,
please consult with an installer.
2.2 Network Connection
The
Video Server
connect a standard RJ-45 cable to it. Generally a cross cable is used for directly connection
to PC, while a direct cable is used for connection to a hub.
2.2.1 VIDEO SERVER IP Assignment
Video server that is first connected to network basically has no IP address. So, it is
necessary to allocate the IP address of video server with an IP allocation program.
Open the program folder installed with the provided CD and execute "IP Setting Utility".
supports the operation through the network. Therefore, it is necessary to
1. MAC Address
- Enter MAC address of the product
for IP input.
2. IP Address
- Enter IP address to use.
3. Ethernet Adapter
- In case there are several network
cards, select a card to use for the
operation of video server.
4. Start
- Allocate input IP to the video
server to use. When a completion
message appears on ○
window in several seconds or
minutes,
process. You can add additional
IPs to other devices continuously.
- 3 -
Status
5
input
completes
its
Advertisement
Table of Contents
