Mitsubishi Electric NM-VS100 Installation And Operation Manual page 26

PTZ Setting
-Protocol: If a PTZ Camera
'HITRON – Fastrax II' protocol. Consult service personnel if a
is installed with device other than a keyboard controller.
-Device ID: Setting PTZ Camera
Com Port Setting
-Baud Rate: Setting PTZ Camera Baud Rate. (Default 9600 bps)
-Data Bits: Setting PTZ Camera Data Bits. (Default None)
-Parity Bits: Setting PTZ Camera Parity Bits. (Default 8 bits)
-Stop Bits: Setting PTZ Camera Stop Bits. (Default 1 bit)
ETC Setting
-Preset: Save preset. Recall preset.
-Auto Scan: Calls Auto panning function.
-Tour: Recalls programmed presets or functions sequentially.
-Pattern: Repeats the selected pattern of the current PTZ Camera.
is to be installed with a Fastrax keyboard controller, select
Address (ID)
- 20 -
PTZ Camera