Table of Contents
Advertisement
INSTALLATION AND CONNECTION
DIP Switch
Configure the IMPEDANCE of VIDEO input.
If selecting 75ohm, IMPEDANCE will be set as 75Ω. And if selecting Hi-Z, IMPEDANCE
will be set as infinity.
Video Input/Output
DX-VS1UE has video input and output terminal. To monitor image with CCTV monitor that has
the changeover switch of impedance, you need to set 75ohm to impedance of video input of DX-
VS1UE and set Hi-Z to the changeover switch of impedance of the monitor like the below figure.
In case of CCTV monitor without the changeover switch of impedance, you need to set Hi-Z to
impedance of video input of DX-VS1UE.
21
DX-VS1UE
DX-VS1UE Setup Guide
Advertisement
Table of Contents
