Table of Contents
Advertisement
5604 Wireless Handset User Guide
Customizing Your Phone
Switch the Handset On/Off
The handset is switched off:
1. Press and hold the On-hook key
When pressing the On-hook key, the handset will vibrate and the display lights up.
2. A dialog window "Switch on?" is displayed. Confirm by pressing "Yes".
The handset is in idle mode:
Note: If the handset is a shared phone, it must first be logged out to be able to switch
off the handset. See "Log a Shared Phone On/Off" on page 14.
1. Press and hold the On-hook key
2. A dialog window "Switch off?" is displayed. Confirm by pressing "Yes".
Log a Shared Phone On/Off
Note: This feature requires that the parameter "Phone mode" is configured. See Mitel
5604 Wireless Handset Configuration Manual.
The feature shared phone allows more than one user to use a handset. When a handset is
configured to be a shared phone, it can be used by any shared phone user in the system. The
message and call lists are deleted when a user logs off a handset.
Log on a Handset
Prerequisite, the handset is switched on. See "Switch the Handset On/Off" on page 14 for more
information.
1. A dialog window "Login?" is displayed. Press the soft key "Yes".
2. Enter User ID and password.
3. Press "Login".
Log off a Handset
1. Press and hold
2. A dialog window "Logout?" appears. Press the soft key "Yes".
Turn the Audible Signal On/Off
A long press on the
The
icon indicates a silenced handset.
14
.
.
.
or
in idle mode, changes between ring signal on/off.
Advertisement
Table of Contents
