Before Use; Preparation Procedure - A&D AD-6121ABT1 Instruction Manual

5. BEFORE USE

5.1. Preparation Procedure

1 Use the four type LR6 alkaline batteries.
2 Place the scale on a solid floor and level the
scale using the leveling feet so that the
bubble in the spirit level is centered.
Using the batteries
5.1.1.
When installing the batteries, match the + (positive) and – (negative) terminals to
those indicated in the battery compartment.
Use four type LR6 batteries.
Do not mix old and new batteries.
Remove the batteries if the scale is not to be used for a long period of time. The
batteries may leak and cause a malfunction.
If the battery liquid spills on the body, wash the body part under running water
immediately.
When the Low battery mark
batteries.
Please note that the Low battery mark
completely drained.
1 Remove the battery compartment cover.
2 Install four new type LR6 batteries into the battery
compartment, taking care that the polarities (+) and (-)
are correct.
3 Replace the battery compartment cover.
AD-6121ABT1
Good
CAUTION
appears, replace the batteries with four new type LR6
does not appear when the batteries are
- 6 -
Spirit level
No good
Leveling foot
English