CLI Reference
info cid pid status
This command presents the status of the specified port.
Example:
3ware CLI> info c0 p5 status
/c0/p5 Status = OK
info cid pid model
This command presents the model of the specified port.
Example:
3ware CLI> info c0 p5 model
/c0/p5 Model = WDC WD1600BB-00DAA0
info cid pid serial
This command presents the serial number of the specified port.
Example:
3ware CLI> info c0 p5 serial
/c0/p5 Serial = WD-WMACK1406498
info cid pid capacity
This command presents the capacity, both in human readable form (such as
GB) and block count of the specified port. Note that capacity is computed
based on division by 1024 (not 1000 as is popular with hard disk vendors).
For additional information, see the explanation at "info cid" on page 19.
Example:
3ware CLI> info c0 p5 capacity
/c0/p5 Capacity = 149.05 GB (312581808)
info cid pid smart
This command extracts SMART (Self Monitoring Analysis and Reporting)
data from the specified disk. The data is extracted live from the disk;
therefore, this command is used to get the most recent data about the presence
or absence of a disk. The SMART data is displayed in hexadecimal form.
Since SMART data is extracted live from this disk, it places a burden on the I/
O bandwidth.
Example:
3ware CLI> info c0 p5 smart
10 00 01 0B 00 C8 C8 00 00 00 00 00 00 00 03 07
00 9A 96 BC 14 00 00 00 00 00 04 32 00 64 64 7A
00 00 00 00 00 00 05 33 00 C8 C8 00 00 00 00 00
...
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2C
26
3ware 9000 Series Serial ATA Controller CLI Guide