Table of Contents
Advertisement
R e s e t t i n g t h e
D V D p l a y e r
As you select each Type the DVD player is reset to that Type.
When you have selected the Type you want:
• Press Exit or On/Off to return to standby.
To toggle the IR mode
• If necessary press On/Off to put the DVD player into standby.
• Press More.
The display shows:
Type
Type 0
Type 1
Type 2
Type 3
Type 4
Type 5
Type 6
To connect to this
2-channel analogue amplifier.
2-channel DSP loudspeakers.
Surround processor not multichannel or 96kHz-capable.
Multichannel processor.
Multichannel processor.
Multichannel processor.
Directly to loudspeakers in a surround system.
• Press IR to toggle between IR Auto (auto setup), IR Con
(controller), and IR N.Con (not controller).
• Press Exit or On/Off to return to standby.
Types
The Types configure the DVD player in the appropriate way
according to the other equipment you are connecting it to, and
whether it is performing video switching, as shown in the following
table:
Video switching
Yes.
Yes.
Yes.
Yes.
In surround controller.
No.
Yes.
See page
11
10
12
12
12
12
13
Advertisement
Table of Contents
