Meridian G92 Installation Manual page 42

 
C o n f i g u r i n g
t h e D V D p l a y e r
To select internal decoding for the multichannel output
• Highlight Internal decode in the Multichannel out menu,
and press Enter.
The following menu is displayed:
• Choose Yes if you are connecting the multichannel outputs to a
Meridian digital surround controller.
Note that in surround mode the multichannel outputs will always
decode the bitstream, regardless of this setting.
HDMI output settings
To specify the HDMI output settings
• Highlight HDMI out... in the Audio setup menu, and press
Enter.
The HDMI out... menu will be displayed:
• Set Internal decode to No if you are connecting the HDMI
output to a bitstream-capable HDMI receiver.