To create an analogue surround system (Type 6)
A330
Main right
Rear right
The G92 provides six analogue outputs, and includes surround
decoding to allow you to create a 5.1 surround system directly
connected to six power amplifiers and passive loudspeakers, or 300
Series Active and Passive Installation Loudspeakers powered by the
G41 Active Crossover Amplifier.
• Connect the LEFT and RIGHT analogue outputs to the power
amplifier inputs for the main front loudspeakers.
• Connect the SURR L and SURR R analogue outputs to the power
amplifier inputs for the rear loudspeakers.
G92 DVD Player Controller Tuner
ANALOGUE OUT
CHANNEL 1
INPUTS
1
3
4
CHANNEL 3
A
A330
P330
Centre
• Connect the CENTRE analogue output to the power amplifier
input for the centre loudspeaker.
• If the system includes a subwoofer connect the SUB analogue
output to an active analogue subwoofer, such as the Meridian
SW1600.
• Configure the DVD player to Type 6; see Resetting the DVD
player , page 25.
• Configure the surround system as described in To configure
speakers , page 39.
Analogue subwoofer
COMMS
INPUT OUTPUT
G41 Powered
CHANNEL 2
Crossover/Amplifier
2
CH. A CH. B
B
P330
Rear left
I n s t a l l i n g t h e
D V D p l a y e r
PHONO
A330
Main left