Introduction; The G92 Dvd Player Controller Tuner - Meridian G92 Installation Manual

Controller tuner
Hide thumbs Also See for G92:
Table of Contents

Advertisement

This guide provides full information about unpacking the DVD player, connecting it to the
other equipment in the system, and configuring it using the front panel.
Once you have connected and configured the DVD player, refer to the G Series System Guide
The G92 DVD Player Controller
Tuner
The G92 is a full 5.1 DVD Surround Receiver with both stereo and
surround modes, a robust slot-loading DVD drive, and analogue
or digital 2 channel or 6 channel outputs. It plays audio CDs, MP3
CDs, Video CDs and DVD-Video discs including the DVD side of
DualDisc hybrids. It can decode Dolby Digital, DTS, MPEG, and MP3
data streams to PCM for stereo and multichannel playback and
also includes Trifield high-resolution stereo processing. Stereo and
multichannel digital audio outputs are also available via HDMI at
up to 192kHz.
Audio
The G92 incorporates a preamplifier with two coax digital inputs,
two optical inputs, and three analogue inputs. It provides analogue
and fixed digital stereo outputs. The G92 includes digital signal
processing to upsample PCM streams, or decode bitstreams from
external sources. It also includes a high-quality AM/FM or DAB/FM
tuner.

Introduction

for information about operating it.
In stereo mode, the G92 is designed to connect directly to a pair of
analogue active speakers, or power amplifiers and passive speakers.
Alternatively, it can be connected to a pair of Meridian DSP
Loudspeakers to create a complete two-channel AV system.
The G92's multichannel digital output allows connection to a
surround controller such as the G68. Alternatively, the digital and/or
analogue multichannel outputs can be used to create a powerful
5.1 surround system based on Meridian DSP Loudspeakers or
conventional analogue amplifiers and speakers – or a combination
of the two. Here the G92 really comes into its own: as the heart of
a complete surround system.
Video
The G92 includes a powerful video processor and scaler which
can simultaneously provide composite and S-video outputs, plus
progressive component video and up to 1080p on an HDMI output.
It provides two composite, three S-video, and one interlaced
component video input, all of which can be routed to any of the
video outputs with appropriate scaling.

I n t r o d u c t i o n

Advertisement

Table of Contents
loading

Table of Contents