Advertisement
LANTIME M300/TCR: IRIG Time Server with Time Code Receiver
The Meinberg LANTIME M300/TCR IRIG time server provides accurate time to networks of any size. It
synchronizes all systems either NTP- or SNTP-compatible and comes with a built-in Meinberg TCR module
which decodes a [1]
IRIG/AFNOR
precise oscillator is capable of bridging failures or a temporary loss of the IRIG signal..
Important note
Produktgruppe
Key Features
- Synchronization of NTP and SNTP compatible clients
- Web based status and configuration interface [2]
utility
- Supported net protocols: IPv4, IPv6, NTP, (S)NTP, DAYTIME, DHCP, HTTP, HTTPS, FTP, SFTP,
SSH, SCP, SYSLOG, SNMP, TIME, TELNET
- Alert-Notification system of status change by Email, WinMail, SNMP or an external connected display
- Full SNMP v1,v2,v3 support with own SNMP-daemon for status and configuration and SNMP Trap
messages
- USB Port for installing firmware updates, locking frontpanel menu access and backup/restore of
configuration and log files
- Optional expansions and/or configurations available: [3]
rev 2013.0704.1631
signal from any compatible time code generator. A highly stable and
(Demo)
Page 1/5
and console based graphical configuration
Product Options
Meinberg Radio Clocks
Lange Wand 9
31812 Bad Pyrmont, Germany
Phone: +49 (5281) 9309-0
Fax:
+49 (5281) 9309-30
http://www.meinberg.de
info@meinberg.de
lantime-m300-tcr
Advertisement
Table of Contents
Related Manuals for Meinberg LANTIME M300/TCR
Summary of Contents for Meinberg LANTIME M300/TCR
-
Page 1: Key Features
LANTIME M300/TCR: IRIG Time Server with Time Code Receiver The Meinberg LANTIME M300/TCR IRIG time server provides accurate time to networks of any size. It synchronizes all systems either NTP- or SNTP-compatible and comes with a built-in Meinberg TCR module... - Page 2 Description The LANTIME M300/TCR Network Time Server combines a Time Code Receiver module with an embedded Linux computer. The GNU/Linux operating system of the LANTIMEs SBC (Single Board Computer) has been optimized to ensure a high level of security and reliability.
- Page 3 Characteristics Type of receiver Integrated [4] IRIG A/B Time Code Receiver Display LC-display, 2 x 40 characters, with backlight Control elements Eight push buttons to set up basic network parameters and to change receiver settings Status info Four bicolor LEDs showing status of: - reference time - time service - network...
- Page 4 Firmware is field-upgradeable, updates can be installed directly at the unit or via a remote network connection. Software updates are provided free of charge, for the lifetime of your Meinberg product. RoHS-Status of the product This product is fully RoHS compliant WEEE status of the product This product is handled as a B2B category product.
- Page 5 Options and Accessories Optional add-ons and accessories: [6] Product Options Additional Information Additional information about the Meinberg LANTIME family of NTP time servers and other LANTIME models can be found on the [7] LANTIME NTP Time Server Family Page Manual...
Need help?
Do you have a question about the LANTIME M300/TCR and is the answer not in the manual?
Questions and answers