Sharp PC-A500 Manual page 24

Table of Contents

Advertisement

Removing Floppy Disk Drive Box
1.
Remove the floppy disk from the floppy disk drive.
2.
Turn off the computer.
3.
Disconnect the floppy disk drive box by simultaneously pressing the buttons on
each side of the connector and pulling it out.
2
Installing Floppy Disk Drive Unit into Expansion Bay
Remove the floppy disk drive unit from the floppy disk drive box before installing
the unit into the expansion bay of your computer.
Removing Floppy Disk Drive Unit from Floppy Disk Drive Box
1.
Turn off the computer.
2.
Remove the floppy disk drive box from the computer.
3.
Turn over the box.
4.
Slide the lever and pull out the floppy disk drive unit.
Lever
2-8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pc-a520

Table of Contents