Using The Remote Control - Philips DVDR7310H User Manual

Remote Control

Using the remote control

3
1
2
A
Open the battery compartment.
B
Insert two batteries type R06 or AA,
following the indications (
the compartment.
C
Close the cover.
CAUTION!
– Remove batteries if they are
exhausted or if the remote control
is not to be used for a long time.
– Do not mix batteries (old and new
or carbon and alkaline, etc.).
– Batteries contain chemical
substances, so they should be
disposed of properly.
14
(continued)
A
B
C
+-
) inside
Using the remote control to
operate the system
Aim the remote
control directly at the
remote sensor (iR)
on the front panel.
Select the source you
wish to control by
pressing TUNER or
DISC MENU button.
Select the desired
function (for
example . / >).
Using the alphanumeric keypad to
enter the characters
– Press a number button repeatedly until
the required character or the number
appears.
– To enter language-dependent
characters, press . / > on the
corresponding character, e.g.,: 'å' press
button {2} for 'a' and then press >
until 'å' appears.
– To enter special symbols, press button
{1} repeatedly.
– To select upper/lower case (capital/
small) letters, press a/A.
– To enter a space, press button {1}.