Recording; Before Recording; About Temporary Hdd Storage/Time Shift Video Bar - Philips DVDR7310H User Manual

About temporary HDD
storage/Time Shift video bar
The current TV programme will be
stored in the temporary hard disk
storage called 'TSB' (Time Shift Buffer)
once the recorder is turned on. It will
continuously store up to 6 (six) hours of
TV programmes.
The Time Shift video bar will appear on
the TV. It indicates the status and timing
of the TV programmes stored in the
temporary HDD storage. You can
choose to display or hide the video bar
by pressing the INFO
remote control.
The Time Shift video bar consists of the
following information:
a The TV programme start time.
Once it has exceeded 6 (six) hours, the
beginning of the contents will be deleted
and the start time will be changed
accordingly.
b Remaining space in the temporary
storage.
c Clips that are selected to be recorded
onto the HDD (marked Red).
d Current position and time of the TV
programme broadcast.
e Title markers (when you switch to a TV
channel for more than 1 minute, a new
title marker will be created)
f Present time
Warning!
The temporary HDD can only store up
to 6 hours of TV programmes. All the
contents will be cleared when you press
STANDBY-ON 2.
m
button on the

Before Recording

In addition, executing the following
actions will also clear the contents in the
temporary HDD storage :
– Press CAM on the remote control.
– Enter to { Set up } or { Record mode }
option in the system setup menu.
This action will clear the Time Shift Buffer.
Do you want to continue?
Yes
No
i. To proceed and clear the contents in
the temporary HDD storage, press
OK on the remote control to select
{ Yes } in the menu, OR
ii. Select { No } in the menu and press
OK on the remote control to abort.
Marking the contents for recording
You need to 'mark' the contents in the
temporary HDD storage before it can be
recorded to the hard disk drive (HDD),
see page 36.
To select a title (programme)
m
Press INFO to show the overview
panel and use keys to select a title.
To fi nd a scene within the title
Use keys.
To record the programme currently
highlighted on the time shift buffer
Press REC once.
Note: In the countries where no GUIDE
Plus+ TV listings data is available or no such
data is stored, pressing REC will start
recording from the beginning of the current
channel, up to 6 (six) hours. Press REC
repeatedly to set the recording length by 30-
minute increments.
To mark the starting point of

recording

Press the Red button.
To mark the end of the recording
Press STOP .
To cancel the marked recording
Press the Red button.
33