Full Chart; Depth Range - Lowrance X-4 Pro Installation And Operation Instructions Manual

Full Chart

The unit's default page, Full Chart shows all echoes scrolling across the
full screen. The bottom signal scrolls across the screen from right to
left. The line at the top of the screen represents the surface. The bottom
depth — determined by the digital sonar — shows in the upper left
corner.
If the transducer with a built-in temperature sensor is connected, a dig-
ital display for water temperature also will be shown. This temperature
display can be turned on and off.
Digital depth
Water Temp
Bait fish
Bottom signal

Depth range

at bottom of
depth scale
Full Chart page, showing digital depth (above) and temp (below). The
Depth Range
When turned on, the unit automatically adjusts the depth range ac-
cording to water conditions. When in auto range mode, it always keeps
the bottom displayed in the lower portion of the screen. You can over-
ride the automatic depth range control and manually select a depth
range.
To do this, repeatedly press
Press to select
↓
menu. Use the arrow keys to select a desired depth range. When you
are finished, press
This unit has the following depth ranges: 10, 20, 40, 80, 150, 300, 600,
1000 and 2000 feet.
Fish I.D. feature is turned off.
MENU
, then press
M
ANUAL
to clear the menu from the display.
PWR
until the
D
EPTH
to display the
MENU UP
26
Surface clutter
Structure
or cover
Fish arches
®
Grayline
menu appears.
R
ANGE
R
ANGE
S
IZE