SECO-LARM Enforcer EV-1626-NKGQ Installation Manual

SECO-LARM Enforcer EV-1626-NKGQ Installation Manual

Nvd bullet cameras

Advertisement

Quick Links

/
" Sony Super HAD CCD
1
3
12VDC/24VAC
NVD Bullet Cameras have an ultra-low lux rating of 0.000006 allowing the
camera to see in almost total darkness.
Note: Products with model numbers that end with "Q" or that have a round green "Q" sticker are RoHS compliant.
NVD Bullet Cameras
Installation Manual
3 Cameras in 1:
EV-1626-NKGQ
EV-1626-PKGQ
EV-1626-NWGQ
EV-1626-PWGQ
(NTSC)
2.8~12mm
(PAL)
(NTSC)
6~50mm
(PAL)
OSD with service monitor port
600 TV lines

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Enforcer EV-1626-NKGQ and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SECO-LARM Enforcer EV-1626-NKGQ

  • Page 1 NVD Bullet Cameras Installation Manual 3 Cameras in 1: EV-1626-NKGQ (NTSC) 2.8~12mm EV-1626-PKGQ (PAL) EV-1626-NWGQ (NTSC) 6~50mm EV-1626-PWGQ (PAL) ” Sony Super HAD CCD OSD with service monitor port 12VDC/24VAC 600 TV lines NVD Bullet Cameras have an ultra-low lux rating of 0.000006 allowing the camera to see in almost total darkness.
  • Page 2: Specifications

    NVD Bullet Cameras Specifications: EV-1626-NKGQ (NTSC) EV-1626-NWGQ (NTSC) EV-1626-PKGQ (PAL EV-1626-PWGQ (PAL) Type IR LED Bullet Camera ” SONY Super HAD CCD Resolution 600 TV lines NTSC: 768x494 pixels Pickup Elements PAL: 752x582 pixels Video Output / Service Monitor Port Composite video 1.0Vp-p into 75Ω...
  • Page 3 NVD Bullet Cameras Overview: Connect service A. Camera monitor port connector B. Adjustable sunshield to service monitor port C. Mounting plate D. Camera base E. Hex screws F. Mounting screws G. Focus H. Zoom I. Service cover J. Female BNC OSD joystick connector (video out)
  • Page 4: Troubleshooting

    NVD Bullet Cameras Troubleshooting Check that the camera is powered up. Check that the power supply’s polarity is correct. The screen is blank. Check that the monitor is powered up. Check that the video cable connecting the camera to the monitor is connected properly.

This manual is also suitable for:

Enforcer ev-1626-pkgqEnforcer ev-1626-nwgqEnforcer ev-1626-pwgq

Table of Contents