Table of Contents
Advertisement
Quick Links
Elite 3X Vandal Dome Cameras
/
" Sony Super HAD II CCD
1
3
600 TV Lines
12VDC/24VAC
Note: Products with model numbers that end with "Q" or that have a round green "Q" sticker are RoHS compliant.
For Flush or Surface Mount
Installation Manual
EV-2866-NKGQ
EV-2866-PKGQ
3 Cameras in 1:
NTSC
PAL
2.8~12mm Varifocal lens
256x Digital slow shutter
On-screen display (OSD)
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SECO-LARM Enforcer EV-2866-NKGQ
Summary of Contents for SECO-LARM Enforcer EV-2866-NKGQ
- Page 1 Elite 3X Vandal Dome Cameras For Flush or Surface Mount Installation Manual EV-2866-NKGQ NTSC EV-2866-PKGQ 3 Cameras in 1: ” Sony Super HAD II CCD 2.8~12mm Varifocal lens 600 TV Lines 256x Digital slow shutter 12VDC/24VAC On-screen display (OSD) Note: Products with model numbers that end with “Q” or that have a round green “Q” sticker are RoHS compliant.
-
Page 2: Specifications
Elite 3X Vandal Dome Cameras for Flush or Surface Mount Specifications: EV-2866-NKGQ EV-2866-PKGQ Type IR LED Dome Camera Video Output Mode NTSC Pickup Element ” Sony Super HAD II CCD Resolution 600 TV Lines Lens (Varifocal) 2.8~12mm # of Infrared LEDs... - Page 3 Elite 3X Vandal Dome Cameras Overview: OSD joystick Service monitor port Camera connector Set screw Base (For surface mounting only) Dome Rubber ring Important: DC Plug to Do not cut the DC jack or the female BNC terminal block connector as this will void the warranty. DC Jack Before Starting: 1.
-
Page 4: Troubleshooting
Elite 3X Vandal Dome Cameras for Flush or Surface Mount Troubleshooting: Check that the camera is powered up. Check that the power supply’s polarity is correct. Check that the monitor is powered up. The screen is blank. Check that the video cable connecting the camera to the monitor is connected properly.
Need help?
Do you have a question about the Enforcer EV-2866-NKGQ and is the answer not in the manual?
Questions and answers