SECO-LARM Enforcer EV-1323B12DW Installation Manual

ENFORCER CCD IR D /N
AY

TROUBLE SHOOTING

The screen is blank • Check that the camera is powered up.
• Check that the power supply's polarity is correct.
• Check that the monitor is powered up.
• Check that the video cable connecting the camera to the monitor is connected properly.
The screen image is dim
• Clean the lens (using a soft, clean cloth).
• Check that the light source is adequate.
The screen image has poor contrast • Adjust the monitor's contrast knob.
• Change the position of the camera.
The screen image flickers • Change the position of the camera.
The screen image is distorted
• Change the position of the camera.
The camera case is hot • Check that the correct power supply is in use.
IR LEDs do not turn on
• Check that the correct power supply is in use.

IMPORTANT

Users and installers of this product are responsible for ensuring this product complies with all national, state, and local laws
and statutes related to monitoring and recording audio and video signals. SECO-LARM will not be held responsible for the use
of this product in violation of any current laws or statutes.

WARNING

Stop using the camera if you see a malfunction like smoke or unusual heat, as it could cause fire or electric shock. Do not open the case
of this device, as there are no field-serviceable components inside.

FCC COMPLIANCE STATEMENT

Information to the user: This equipment has been tested and found to comply with the limits for a class a digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.

WARRANTY

ENFORCER IR Cameras are warranted against defects in material and workmanship while used in normal service for a period
of one (1) year from the date of sale to the original customer. Our obligation is limited to the repair or replacement of any
defective part if the unit is returned, transportation pre-paid, to SECO-LARM.

NOTICE

The information and specifications printed in this manual are current at the time of publication. However, the SECO-LARM policy is one
of continual development and improvement. For this reason, SECO-LARM reserves the right to change specifications without notice.
SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2004 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or in part,
without the written permission of SECO-LARM.
SECO-LARM SECO-LARM SECO-LARM SECO-LARM SECO-LARM U.S.A., Inc. U.S.A., Inc. U.S.A., Inc. U.S.A., Inc. U.S.A., Inc.
®
16842 Millikan Avenue, Irvine, CA 92606
Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326
C M
IGHT AMERA ANUAL
Website: www.seco-larm.com
E-mail: sales@seco-larm.com
1/3" CCD Color IR Day/Night Camera
1/3" CCD B/W IR Day/Night Camera
SECO-LARM SECO-LARM SECO-LARM SECO-LARM SECO-LARM
® PITNW1
DAY_NIGHT_IMU0604c.PMD
ENFORCER CCD IR D /N
AY
MANUAL
EV-1323C12DW
EV-1323B12DW
Weatherproof
® ® ® ® ®
C M
IGHT AMERA ANUAL
®