SECO-LARM Enforcer EV-1223C12 Specifications

Dome Cameras
With Multi-Axis Gimbal Brackets*
Model Lens Angle
EV-1223C12
EV-122C-2
EV-122B-4
SECO-LARM offers both Black & White and Color
Dome Cameras for use in those applications which
require an attractive, inconspicuous look.
SECO-LARM dome cameras offer high resolution
with low lux in a compact and durable enclosure.
*For ceiling or wall mounting
Wire
Lens
Harness
Screw Screw
Support
Support
Bracket
Bracket
For wall mounting. Remove the 2 screws and turn the
lens 90 clockwise until the wire harness is adjacent to the o
support bracket, then replace the 2 screws to secure it.
Copyright 2007 SECO-LARM U.S.A., Inc. All rights reserved.
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
16842 Millikan Avenue, Irvine, CA 92606
Type
4.3mm 78° Color
2.9mm
120° Color
4.3mm
78° B/W
Viewing angles are approximate
Wire
Support
Harness
Bracket
1.949.261.2999 (CA & Int'l)
Email: info@seco-larm.com

Technical Specifications:

Type
Chip 1/3" CCD, Sony
Resolution
Pickup elements
Scanning system
Sync
Video output
EV-1223C12 / EV-122B-4 (4.3mm)
Lens
Viewing Angle*
Minimum illumination
Gamma correction
S/N ratio
Shutter control
Backlight compensation
Gain control
White Balance
D/A Bits
Power source
Power consumption
Operating temperature
Dimensions
1.800.662.0800 Fax: 1.949.261.7326
Website: www.seco-larm.com
Color Cameras B/W Camera
1/3" CCD, A1 PROs
420 TV lines
512 x 492 pixels (NTSC / EIA)
2:1 interlace
Internal
1V pp composite output, 75 ohms
EV-122C-2 (2.9mm)
EV-1223C12 / EV-122B-4 (78 )
EV-122C-2 (120 ) °
0.1 lux
0.45
>48dB (AGC off)
Auto Electronic Shutter (AES)
1/60~1/100,000 sec. (NTSC / EIA)
Auto & Manual
Auto
AWB N/A
10
12VDC
110mA 100mA
14°~140° F (-10°~60° C)
3 / 1 " x 2 / 1 " (88 x 57 mm)
2 4
BasicDomeCamsb.cdr
°
®