Download Print this page
SECO-LARM ENFORCER EV-N2506-NW4WAQ Installation Manual

SECO-LARM ENFORCER EV-N2506-NW4WAQ Installation Manual

Ip 5mp 2.8~12mm motorized vandal dome camera with wdr

Advertisement

Quick Links

IP 5MP 2.8~12mm
Motorized Vandal
Dome Camera
with WDR
EV-N2506-NW4WAQ
Installation Manual
Features
1
/
" 5MP SmartSens CMOS sensor
2.7
• 30FPS@ 5MP (2880x1620)
• 2.8~12mm Motorized lens
• Tri-stream encoding:
H.265, H.264, and MJPEG
• True Wide Dynamic Range (WDR)
• Digital Noise Deduction (3DNR)
• True Day & Night function with ICR module
• ICR Sensitivity adjustment
• Corridor mode
• IP66 Weatherproof
• IR Range 147' (45m)
• Smart IRs adjust IR strength to conditions
• MicroSD slot (512GB max)
• PoE (IEEE802.3af), 12VDC
• ONVIF
®
Profile G, S, and T conformant
• Operating temperature: -40°~131°F
(-40°~55°C)
®
ONVIF
is a trademark of ONVIF, Inc
AI Functions
• Human and Vehicle Detection
• Perimeter Intrusion Detection
• Line Crossing Detection
• Stationary Object Detection
• Cross Counting
• Heat Map
• Crowd Density Detection
• Queue Length Detection
• Face Detection
For the full Web Administration manual,
download from the camera's product
page on www.seco-larm.com.

Advertisement

loading
Need help?

Need help?

Do you have a question about the ENFORCER EV-N2506-NW4WAQ and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SECO-LARM ENFORCER EV-N2506-NW4WAQ

  • Page 1 For the full Web Administration manual, • PoE (IEEE802.3af), 12VDC download from the camera’s product • ONVIF ® Profile G, S, and T conformant page on www.seco-larm.com. • Operating temperature: -40°~131°F (-40°~55°C) ® ONVIF is a trademark of ONVIF, Inc...
  • Page 2 On-board storage Built-in memory card slot, Supports MicroSD/SDHC/SDXC up to 512GB Dimensions Adjusting the 2-Axis Gimbal ø5 " (ø149mm) " (109mm) Move the camera vertically up and down or rotate the camera to change the camera lens angle. SECO-LARM U.S.A., Inc.
  • Page 3 8. Once installed, the user will be able to view live static IP setting is as follows: camera video and modify necessary IP Address: 192.168.0.10 (you can change the configurations. last column) NOTE: For the full Web Admin manual, download from the camera’s product page on www.seco-larm.com. SECO-LARM U.S.A., Inc.
  • Page 4 IMPORTANT: Users and installers of this product are responsible for ensuring this product complies with all national, state, and local laws and statutes related to monitoring and recording audio and video signals. SECO-LARM will not be held responsible for the use of this product in violation of any current laws or statutes.