Seagate BARRACUDA 50 Installation Manual page 34

Table of Contents

Advertisement

32
2.
Configure termination.
ST150176LC drives are designed for installation in host sys-
tems that have a backplane with single connector attach-
ment (SCA) connections. Termination is normally provided
on this backplane. Check your host system documentation
for details.
adapters separate the interface lines from the power lines. If
you use such an adapter, proceed with step 2 of the installa-
tion instructions provided for ST150176LW drives.
Note. Host systems designed to use ST150176LC drives nor-
mally provide termination power from the host adapter or
other source. ST150176LC drives cannot be configured
to provide termination power to the bus.
Barracuda 50 Installation Guide, Rev. A
• You can use this drive in host systems that do
not have a backplane with SCA connectors by
using a SCA to wide SCSI-2 adapter. These

Advertisement

Table of Contents
loading

This manual is also suitable for:

St150176lwSt150176lc

Table of Contents