Seagate BARRACUDA 50 Installation Manual page 37

Table of Contents

Advertisement

Barracuda 50 Installation Guide, Rev. A
4.
Mount the drive in the host system.
To mount an "LC" drive, plug the drive into the system's sin-
gle connector attachment (SCA) position on the system's
backplane. The SCA connector on the drive contains inter-
face and power functions, so it does not require a separate
power connector. The dimensions of the drive are provided
in Figure 15.
Some host systems require that you first mount the drive to
a sliding tray or courier before inserting it into the system.
This drive model plugs directly into a backplane connector
and therefore does not use cables.
80-pin
SCSI I/O
Connector
Pin 1
Figure 14. 80-pin I/O connection to drive (LC model)
J2
J6
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

St150176lwSt150176lc

Table of Contents