Moving And Storage Instructions; Troubleshooting - Schumacher XM1-5 Owner's Manual

Automatic battery charger
Hide thumbs Also See for XM1-5:
Table of Contents

Advertisement

Available languages

Available languages

15.

MOViNG ANd STORAGE iNSTRUCTiONS

15.1
Store the charger unplugged, in an upright position. The cord will
still conduct electricity until it is unplugged from the outlet.
15.2
Store inside, in a cool, dry place (unless you're using an on-board
Marine Charger).
15.3
Do not store the clips clipped together, on or around metal, or
clipped to cables.
15.4
If the charger is moved around the shop or transported to another location,
take care to avoid/prevent damage to the cords, clips and charger. Failure
to do so could result in personal injury or property damage.
16.

TROUBLESHOOTiNG

PROBLEM
Charger will not turn
on when properly
connected.
POSSiBLE CAUSE
AC outlet is dead.
AC POWER LED is
not lit.
Poor electrical
connection. AC
POWER LED is not lit.
Severely discharged,
but otherwise good,
battery.
Clips are not making
a good connection
to the battery.
CONNECTED LED is
not lit.
• 12 •
REASON/SOLUTiON
Check for an open
fuse or circuit breaker
supplying the AC outlet.
Check the power cord
and extension cord for
a loose fitting plug.
The battery may not
want to accept a
charge due to a run-
down state. Allow the
charging to continue
until the battery has had
a chance to recover
sufficiently enough to
take a charge. If more
than 20 minutes, stop
charging and have the
battery checked.
Check for poor
connection to battery
and frame. Make sure
connection points are
clean. Rock clips back
and forth for a better
connection.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Speed charge xm1-5

Table of Contents