Program Personal Speed Dial Names For Other Stations - Samsung OFFICESERV 100 Series System Administration & Special Features Manual

iDCS KEYSETS
8D KEYSET PROGRAMMABLE
KEYS LAYOUT
A B
C D
E F
Transfer Speaker
DS 5000 SERIES KEYSETS
7S KEYSET PROGRAMMABLE
KEYS LAYOUT
F
A B C D E
21D KEYSET PROGRAMMABLE
KEYS LAYOUT
B F
A C D E
Open customer programming and follow the instructions below.
ACTION
1. Press TRSF and then dial 105
Display shows
2. Dial the station number (e.g., 205) OR
press UP or DOWN to select the station
and press the right soft key to move the
cursor OR press the left soft key to go
to step 4
3. If the selected station has no speed dial
bins, this display will be shown and a new
station may be selected
28D KEYSET, 18D KEYSET
PROGRAMMABLE KEYS LAYOUT
VOLUME
Transfer
A C E
Speaker
B D F
14D KEYSET PROGRAMMABLE
KEYS LAYOUT
F
A B C D E
DISPLAY
[201] SPEED DIAL
00 :
[205] SPEED DIAL
00 :
[205] SPEED DIAL
SPDBLK NOT EXIST
22
4. Dial the location number (e.g., 05) OR
press UP or DOWN to select the location
and press the right soft key to move the
cursor OR press the left soft key to return
to step 2
5. Enter the trunk access code (e.g., 9)
followed by the number to be dialed
(e.g., 4264100) OR press the right
soft key to return to step 2 OR press the
left soft key to return to step 3 OR press
HOLD to clear an entry (if an error is made,
use the DOWN key to step back)
6. Press the F key to access Program Station
Speed Dial Names OR press TRSF to save
and exit programming OR press SPK to save
and advance to the next program
DEFAULT DATA: NO SPEED DIAL NUMBERS PROGRAMMED
PROGRAM PERSONAL SPEED DIAL NAMES
FOR OTHER STATIONS
Each individual station user can program his/her own names but in cases where it
is impractical or for single line telephone users, this program allows a system
administrator to view or change any station's speed dial names. The station speed
dial codes are 00–49. Each station begins with ten numbers (00–09) and can be
assigned more in blocks of ten up to a maximum of fifty numbers.
PROGRAM KEYS
UP & DOWN - Used to scroll through extension numbers and speed dial bins.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
SPK - Used to store data and advance to next program.
HOLD - Used to clear previous entry.
ANS/RLS - Used to select ALL.
ACTION
1. Press TRSF and then dial 106
Display shows
23
[205] SPEED DIAL
05: _
[205] SPEED DIAL
05 : 9-4264100_
DISPLAY
[201] SPEED NAME
00: