Program Trunk Names; Program Station Group Names - Samsung OFFICESERV 100 Series System Administration & Special Features Manual

PROGRAM TRUNK NAMES

This program is used to assign a character name or identification for each C.O. line.
You may assign a name of 11 characters long.
PROGRAM KEYS
UP & DOWN - Used to scroll and move cursor.
KEYPAD - Used to enter characters.
HOLD - Press to clear entry.
Open customer programming and follow the instructions below.
ACTION
1. Press TRSF and then dial 404
Display shows
2. Dial trunk (e.g., 704) OR press UP or
DOWN to select trunk and press the right
soft key to move the cursor
3. Enter the trunk name using the procedure
in Program Station Names and press the
right soft key to return to step 2
4. Press TRSF to store and exit programming
OR press SPK to store and advance to
the next program
DISPLAY
[701] TRUNK NAME
[704] TRUNK NAME
[704] TRUNK NAME
SAMSUNG
16

PROGRAM STATION GROUP NAMES

This program is used to assign a character name or identification for each station
group. You may assign a name 11 characters long.
PROGRAM KEYS
UP & DOWN - Used to scroll and move cursor.
KEYPAD - Used to enter characters.
HOLD - Press to clear entry.
Open customer programming and follow the instructions below.
ACTION
1. Press TRSF and then dial 602
Display shows the first group
2. Dial the group number (e.g., 505) OR
press the UP or DOWN key to make a
selection and press the left or right
soft key to move the cursor
3. Enter the name using the method
in Program Station Names
4. Press the left or right soft key to return to
step 2 OR press TRSF to store and exit
programming OR press SPK to store and
advance to the next program
17
DISPLAY
[501] SGR NAME
[505] SGR NAME
[505] SGR NAME
SAMSUNG