Create A New Contacts Entry; Create A Personal Entry; Create A Group Entry - Kyocera DuraPro User Manual

Create a New Contacts Entry

Create a Personal Entry

Create personal Contacts entries, which also will be the basis of group entries.
1. In standby mode, press CONTACTS (right softkey) > Add New... > New Contact.
2. Enter a name for the new entry and press the navigation key down.
3. Enter the phone number and press
4. Highlight a number type for the entry (Mobile, Home, Work, Pager, Fax, or Other)
and press
5. Press DONE (left softkey).
After you have saved the number, the new Contacts entry is displayed.
Tip: ICE - In Case of Emergency
To make it easier for emergency personnel to identify important contacts, you can list
your local emergency contacts under "ICE" in your phone's Contacts list. For example,
if your mother is your primary emergency contact, list her as "ICE-Mom" in your
Contacts list. To list more than one emergency contact, use "ICE1-___," "ICE2-___,"
etc.

Create a Group Entry

You can create a group by assigning personal Contacts entries as members and then naming
the new group. Each group entry can contain up to 40 members.
1. In standby mode, press CONTACTS (right softkey) > Add New... > New Group.
2. Read the message and press START (left softkey).
3. Highlight an entry you want to add to a group and press
in the box next to the selected entry.
 If the entry has more than one phone number or email address, select a number or
numbers, or address or addresses, and press DONE (left softkey). Each selected
number or address will be added as a separate entry to the group.
Tip: Press OPTIONS (right softkey) > Enter New Address or Recent History to enter a new
phone number or email address, or to select an entry from your history.
4. When you have selected all the entries you want to add, press CONTINUE (left
softkey).
5. Enter a group name and press
Contacts
.
.
> SAVE (left softkey).
38
. A check mark will appear