Registering Pin Code; Selecting The Bluetooth Device You Wish To - Kenwood DPX-U6120 Instruction Manual

Function of DPX-U6120 with KCA-BT200/BT300 (Optional Accessory)
Bluetooth Setup
Registering PIN Code
By operating the Bluetooth device, specify the PIN
code necessary for registering this unit.
1
Enter Bluetooth mode
Press the [LOG] button for at least 1 second.
2
Enter PIN code edit mode
Turn the [VOL] knob and press it when the
desired item is displayed.
>
Select "Settings" "Detailed Setup"
Code Edit".
The current setting of PIN code is displayed.
3
Input the PIN code
Operation type Operation
Select the numbers. Turn the [VOL] knob.
Move to the next digit. Press the [¢] button.
Delete the last digit. Press the [4] button.
4
Register a PIN code
Press the [VOL] knob.
If "Completed" is displayed, registration is
completed.
5
Exit BT Settings mode
Press the [LOG] button for at least 1 second.
⁄
•
By default, "0000" is specified.
•
A PIN code can be specified with up to eight digits.
44
|
DPX-U6120/ DPX-U5120/ DPX-MP3120
Selecting the Bluetooth device You
Wish to Connect
When two or more Bluetooth devices have already
been registered, you need to select the Bluetooth
device you wish to use.
1
Enter Bluetooth mode
Press the [LOG] button for at least 1 second.
2
Select Bluetooth device selection mode
>
"PIN
Turn the [VOL] knob and press it when the
desired item is displayed.
Cell-phone
Select "Settings"
Selection".
Audio player
Select "Settings"
Selection".
3
Enter Bluetooth device selection mode
Press the [VOL] knob.
"(name)" is displayed.
4
Select the Bluetooth device
Turn the [VOL] knob.
5
Set up the Bluetooth device
Press the [VOL] knob.
"✱(name)" or "-(name)" is displayed.
"✱": The selected Bluetooth device is busy.
"-": The selected Bluetooth device is on standby.
" " (blank): The Bluetooth device is deselected.
6
Exit BT Settings mode
Press the [LOG] button for at least 1 second.
⁄
•
If a Bluetooth device is already selected, deselect it, and
then select a different one.
•
If you cannot select a device using the audio player,
connect the device with the audio player.
> >
"PAIRING" "Phone
> "PAIRING" > "Audio