General Settings; Muting The Audio Upon Reception Of A Phone Call; Demonstration Mode Setting - Kenwood DPX-U5130BT Instruction Manual

General settings

Muting the audio upon reception of a
phone call
Function of DPX-U5130
The audio system automatically mutes when it
receives an incoming call.
When a call comes in
"CALL" appears.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The "CALL" display disappears and the audio system
comes back ON.
When the call ends
Hang up the phone.
The "CALL" display disappears and the audio system
comes back ON.
To use this function
• To use the TEL Mute feature, you need to hook up the MUTE
wire to your telephone using a commercial telephone
accessory. Refer to <Connecting Wires to Terminals> (page
44).
28
|
DPX-U5130BT/ DPX-U5130

Demonstration mode setting

You can turn on/off the demonstration mode.
1
Press and hold the [AUDIO] button.
Enter the Function setting mode.
2
Use the [Control knob] to select "DEMO
MODE".
For how to use the [Control knob], refer to <How to
select the item> (page 9).
3
Use the [Control knob] to select a setting
("ON" or "OFF").
Exit the Function setting mode.
Press and hold the [6] button.