DPX-U5130BT only
Installation the Microphone Unit
1
Check the installation position of the microphone
(accessory 6).
2
Remove oil and other dirt from the installation surface.
3
Install the microphone.
4
Lay the cable up to the unit with it secured at several
positions using tape or the like.
⁄
• Install the microphone as far as possible from the cell-
phone.
Accessory 6
Fix a cable with a commercial item of tape.
Peel off the release coated
paper of double-face adhe-
sive tape to secure the
microphone on the place
shown above.
Adjust the direction of the
microphone to the driver.
47
|
English