Listen To The Cd/ Audio File; Playing Music; Music Search; Skip Search Ratio Setting - Kenwood DPX-U5130BT Instruction Manual

Listen to the CD/ Audio file

Playing music

Playing a disc
Insert a disc in the Disc slot.
When it is inserted, the source is switched
automatically and playback starts.
Playing a USB device
Connect a USB device to the USB terminal using
the CA-U1EX connecter (500 mA Max.: optional
accessory).
When it is connected, the source is switched
automatically and playback starts.
Selecting an audio file folder
DPX-U5130BT
Press the [1] or [2] button.
DPX-U5130
Press the [R] or [S] button.
Selecting a song (track or file)
Press the [E] or [F] button.
Fast-forwarding or fast-backwarding a song
(track or file)
Press and hold the [E] or [F] button.
Pause and play a song (track or file)
Press the [L] button.
Removing disc
Press the [G] button.
Removing USB device
Press the [SRC] button to switch the source to
a device other than USB, and then remove the
USB device.
Data contained in the USB device may be
damaged if you remove it when it is used as the
active source.
20
|
DPX-U5130BT/ DPX-U5130

Music search

You can select the music you want to listen to from
the device or media being played now.
1
Press the [1] button.
"SEARCH" appears and enters the Music search
mode.
2
Search for music
Audio file
Operation type
Selecting folders/files
Determining selection
Skip Search (Music Editor media)
Returning to previous folder
Returning to root folder
Cancellation of Music search mode Press and hold the [6] button.
- indicator: Audio file
; indicator: Folder
CD source
Operation type Operation
Selecting track Turn the [Control knob].
Determining selection Press the [Control knob].
Returning to first track Press the [5].
Cancellation of Music Press and hold the [6] button.
search mode

Skip search ratio setting

You can change the ratio of skip performed as
mentioned in <Skip Search (Music Editor media)>
(page 20).
1
Select the USB source.
Refer to <Source selection> (page 10).
2
Press and hold the [AUDIO] button.
Enter the Function setting mode.
3
Use the [Control knob] to select "SETTINGS" >
"SKIP SEARCH".
For how to use the [Control knob], refer to <How to
select the item> (page 9).
4
Use the [Control knob] to select a ratio.
The previous item appears.
Exit the Function setting mode
Press and hold the [6] button.
Operation
Turn the [Control knob].
Press the [Control knob].
Press the [E] or [F]./
Press and hold the [E] or
[F].
Press the [6] button.
Press the [5].