IMPORTANT! Before assembly or each use, inspect this product for damaged
hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts
are missing, damaged or broken. Contact Mattel for replacement parts and
instructions if needed. Never substitute parts.
This package contains small parts
1
• Place the base tube on a flat surface
as shown.
• Position the left and right base wires as
shown. Note the locations of the coloured
tab on the left and right base wires.
• Fit the left base wire into the base tube.
• Fit the right base wire into the base tube.
• Make sure both coloured tabs on the base wires are visible through
the holes in base tube.
Assembly
CAUTION
in its unassembled state.
Adult assembly is required.
Right Base
Wire
Base
Tube
Base
Tube
Coloured Tab
Back View
6
Coloured Tabs
Left Base
Wire
Base
Wire