Anchored End
B
2
Tighten
To tighten the belts:
• Feed the anchored end of the belt up through the buckle to form a loop
• Pull the free end of the belt
• Repeat this procedure to tighten the other belt.
To loosen the belts:
• Feed the free end of the belt up through the buckle to form a loop
Enlarge the loop by pulling on the end of the loop toward the buckle.
• Pull the anchored end of the belt to shorten the free end of the belt
• Repeat this procedure to loosen the other belt.
Please Note: After adjusting the belts to fit your child, make sure you pull on
them to be sure they are securely fastened.
3
Calming Vibrations
• Make sure your child is properly secured in the seat.
• To turn vibrations on, slide the power switch on the soothing unit to the on
position
.
• To turn vibrations off, slide the power switch on the soothing unit to the off
position
.
IMPORTANT! If vibrations from the soothing unit become faint, or if there
are no vibrations, remove the battery from the soothing unit and dispose of
it properly. Replace the battery with a new LR20 ("D") alkaline battery.
Set-Up & Use
Free End
.
B
Anchored End
B
Loosen
14
Free End
.
.
B
.