Page 3
IMPORTANT! Please remove all parts from the package and identify them before assembly. Adjustable Pillow Left Base Wire #8 x 1,9 cm ( NOTE: Tighten and loosen all screws with a Phillips screwdriver. Parts Some parts may be packed in the pad. Base Tube 2 Feet ") Screw –...
Page 4
IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Mattel for replacement parts and instructions if needed. Never substitute parts. Base Tube Left Base Wire Right Base Wire...
Page 5
Seat Back Tube Square Openings • Position the seat back tube so that the square openings are upright. • Fit the seat back tube onto the ends of the base wire. • Push the seat back tube to be sure it is completely on the base wires.
Assembly Toy Bar Plugs Sockets • Insert and “snap” the toy bar plugs into each handle socket. Hint: The toy bar is removable. Press the ends of the latches and lift the toy bar. Toy Bar Straps • Fasten the toy straps to the toy bar straps. Assembly is now complete.
Battery Safety Information In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage: • Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).
Page 8
Adjustable Pillow • Place the pillow on the strap and press into place. Hint: You can move the pillow up or down for baby's comfort. • If you'd like to use the bouncer without the pillow, simply pull to remove. Fasten the strap to the back of the bouncer. Pillow Strap •...
Need help?
Do you have a question about the L0538 and is the answer not in the manual?
Questions and answers