Roland V-DRUMS TD-10 Owner's Manual page 57

4
Use [INC/DEC] or the VALUE dial to change the material of the body.
In this example, let's change the setting from "Steel" to "Wood." Of the three types, this will pro-
duce the warmest sound.
fig.00-084
This completes our selection of the body material. Next we will specify the depth of the body.
5
Use [CURSOR] to move the cursor to "Shell Depth."
6
Use [INC/DEC] or the VALUE dial to modify the depth of the body.
Since the current setting is a bit deep, let's change this to "3.5"." Notice how the body resonance
decreases.
fig.00-086
Modifying a drum kit
fig.00-085
57