Effect On/Off - Roland V-DRUMS TD-10 Owner's Manual

Effect on/off

If you wish to compare your sounds "with" or "without" ambiance, individual compressors &
equalizers, or digital effects, here they can each be turned on/off for the entire kit.
fig.00-040
1
Press [KIT], and then press [F3 (FX SW)].
The following screen will appear:
In this page, [F1]–[F4] act as on/off switches. For example, pressing [F1] will turn ambiance on/off.
AMBNCE (Ambience):The size of the room and the type of walls can be adjusted to modify the
COMP (Compressor): This is used to smooth volume peaks, preventing overload.
EQ (Equalizer):
EFFECT (Effect):
When these switches are turned off, effects will not apply, regardless of any other settings. Before using ambi-
NOTE
ence or effects, make sure that these switches are turned on.
These settings can be made for each drum kit.
MEMO
Press [EXIT] to return to the "DRUM KIT" display page.
1
sound.
This adjusts the balance of the high, mid and low ranges.
This adds effects such as reverb or delay.
For a better performance
fig.00-041
41