Manual Tuning - Dab; Signal Strength Display - Dab - Roberts Vintage Manual

Manual Tuning - DAB

Manual tuning allows you to tune directly to the various DAB Band III
channels. UK DAB stations are currently located in the range 11B to
12D.
1. Press and hold in the Info button until the display shows 'Manual
Tune'. Press and release the Tuning control to select this function.
2. Rotate the Tuning control to select the required DAB channel.
3. Press and release the Tuning control. The open block in the signal
strength graph shows you the minimum signal strength needed for
good DAB reception. The signal blocks will go up and down showing
the changing signal strength as you adjust the telescopic aerial or
the radio position. Any new radio stations found on the tuned DAB
multiplex will be added to the list stored in the radio.
4. Press and release the Tuning control to return to the normal tuning
mode.

Signal strength display - DAB

1. Repeatedly press and release the Info button until the lower line of
the display shows signal strength.
2. Position your radio and try adjusting the aerial so as to give maximum
number of black rectangles on the signal strength display. Normally,
the best reception will be found with the aerial fully extended.
3. The clear unfi lled rectangle indicates minimum signal level required
for satisfactory reception.
11
1
1-4
1