Adjusting The Contrast Of The Operation Panel Display; Production Control Switch Connecting Connector - JUKI IP-110 Instruction Manual

2-2. Adjusting the contrast of the operation panel display

2
A

2-3. Production control switch connecting connector

2
A
Light
Shade
3
1
3
1
) Press n the drecton of arrow mark the clck of
secton A of cord outlet cover 2 assembled n
the rear of operaton panel 1 and remove the
cover.
2) Turn LCD screen dsplay brghtness adjustment
varable resstor 3 to adjust the brghtness
(contrast) of LCD screen.
1. To prevent the operation panel from
breakage, do not touch the circuit board
pattern and the connector terminal.
2. Do not disassemble the operation panel
to prevent it from breakage.
) Press n the drecton of arrow mark the clck of
secton A of cord outlet cover 2 assembled n
the rear of operaton panel 1 and remove the
cover.
2) Connect the optonal relay cable connector
to CN05 3 of the producton control swtch
connectng connector.
Note) Prepare the switch main unit by the
customers or ask JUKI business office
about it.
Optional relay cable A (asm.)
JUKI Part No. 40008168
3 2 1
CN105
+ 5V 1
SW 2
GND 3
– 4 –